Gallaz Protective Gear Sizing Guide

Learn how to measure for Gallaz pads, read the Gallaz size chart, pick between two sizes and adjust knee and elbow pads for a secure roller skate fit.

8 min read10 viewsGallaz Protective Gear Sizing Guide
— · 0 votes
Contents
  1. How Gallaz pads are sized
  2. Tools and preparation before you measure
  3. Measuring for Gallaz knee pads step by step
  4. Measuring arms for elbow pads and guards
  5. Reading the Gallaz size chart between sizes
  6. Fit and adjustment once the pads arrive
  7. Sizing pads for a group of mixed skaters
  8. When to remeasure or replace Gallaz pads
  9. Questions about Gallaz pad sizing
  10. How do I know what size Gallaz knee pads to get?
  11. Should I size up or down if I'm between sizes in Gallaz pads?
  12. Do Gallaz pads fit the same as other brands?
  13. Can I wear Gallaz knee pads over leggings?
  14. How tight should Gallaz pads be?

Gallaz protective gear sizing starts with a soft tape measure and the current Gallaz size chart. Measure the limb at the points the chart names, then match each number to a size. A correct fit feels snug, should stay put during a fall and lets the joint bend freely.

  • Measure each limb with a soft tape, not by your height or weight.
  • Check the current Gallaz size chart, since each pad line can size differently.
  • When readings fall between sizes, weigh how you skate and how the straps adjust.
  • Test the fit by squatting and kneeling before you skate in new pads.
  • For a group event, log every player's sizes on one shared sheet.

How Gallaz pads are sized

Gallaz pads are matched to the size chart by limb measurements rather than by body height alone. Pad charts like this list circumferences, the distance around a leg or arm at a set point. Two skaters of the same height can need different sizes because limb shape varies widely.

Sizes on the Gallaz size chart are shown as labels, each covering a range of measurements. A measurement that falls inside a range points to that label as your starting size. Each product line can also have its own chart, so read the one for your exact model.

Manufacturers revise charts over time, so an older size may not carry over to new pads. Check the chart on the official Gallaz site or the retailer page before each order. Fresh measurements matter too, since muscle, swelling or growth can change a limb between orders.

Tools and preparation before you measure

Measuring for Gallaz pads needs a flexible cloth or vinyl tape measure and a helper if possible. A rigid metal tape bends poorly around a knee and gives misleading numbers. Without a tape, wrap a piece of string around the limb and measure it against a ruler.

Measure bare skin or over the thin layer you plan to wear under the pads. Thick leggings or knee sleeves add bulk that can push you into a larger size. Write each number down right away, noting which limb and which point you measured.

The tape should lie flat and level, touching the skin without pressing into it. Pulling it tight shrinks the reading, and a loose loop inflates it. Measure both sides of the body, since a left limb can differ from the right one. Use the larger reading when the two sides fall into different sizes.

Measuring for Gallaz knee pads step by step

Gallaz knee pads are measured around the leg at the points named on the knee pad chart. Knee charts for roller skate protective gear may ask for the center of the kneecap. Some charts also list a point above the knee on the thigh or below it on the calf.

Stand with the knee slightly bent, the way you hold it in a skating stance. A straight leg measures differently from a bent one, and pads sit on a bent knee. Keep your weight even on both feet so the muscles stay relaxed.

If a reading lands on the line between two sizes, take it again at the same point. A second or third reading shows whether the first was off. Use the reading that repeats, then move on to the chart.

  • Bend the knee slightly in a skating stance
  • Wrap the tape around the center of the kneecap
  • Measure above and below the knee if the chart asks
  • Keep the tape level and flat on the skin
  • Record each number with the leg and point
  • Repeat on the other leg

Measuring arms for elbow pads and guards

Elbow pads for a Gallaz setup are sized from arm measurements at points the chart names. Those points may include the elbow center, the upper arm above it or the forearm below. Hold the arm slightly bent and relaxed at your side while the helper measures.

Arm muscles tense easily, and a flexed bicep can read noticeably larger than a relaxed one. Let the arm hang loosely before the tape goes around it. Ask the helper to read the tape at eye level so the number is not skewed.

Wrist guards follow their own chart, which may use palm width or wrist circumference instead. Palm width is measured across the knuckles, with the thumb held out of the way. Read each chart separately, even when every piece comes from the same maker.

Reading the Gallaz size chart between sizes

Reading the Gallaz size chart means matching each measurement to the range that contains it. When the chart lists several points, every one of your readings should fit the chosen size. A mismatch between points tells you the pad shape and your leg shape differ.

Choosing between two sizes depends on how you skate and how the pad closes. A skater who falls hard and often may prefer the snugger size for stability. Pads with wide adjustable straps leave more room to tighten a slightly larger size.

The retailer or the maker's support team can advise when your numbers sit on a boundary. Send them every measurement, the point where you took it and the pad model you want. Check the return or exchange terms before ordering, since fit can only be judged on the body.

Fit and adjustment once the pads arrive

Fit and adjustment of Gallaz pads begin with the pad centered on the joint before any strap closes. On a knee pad, the cap should sit directly over the kneecap. Follow the strap order in the instructions, since some designs anchor the pad from one end.

A well-fitted pad feels snug without pinching, numbness or tingling below the straps. Test it by squatting, kneeling and bending the joint through its full range. The pad should stay centered rather than sliding down or twisting to one side.

New pads can feel stiff at first, and the padding may soften with use. Stiffness is different from a wrong size, which shows up as gaps or pressure points. Loosen any strap that leaves deep marks or cuts off circulation, then retest the fit.

CheckCorrect fitToo smallToo large
Feel at restSnug, even pressurePinching or numbnessGaps under the shell
During a squatStays centeredDigs in behind the jointSlides down the limb
When kneelingCap stays over the kneecapCap edges press into the skinCap shifts off the kneecap
StrapsClose with room to adjustBarely reach the closureRun out of tightening room

Sizing pads for a group of mixed skaters

Sizing roller skate protective gear for a group means measuring every player, not guessing by age or build. Mixed groups include adults, teens and beginners whose limb sizes vary widely. Assign one organizer to handle measurements so every reading follows the same method.

A shared sizing sheet keeps a skate event or tournament organized before gear is ordered. List each player with knee, elbow and wrist readings, plus the size each points to. Add the bracket or session each player joins, so gear can be ready by their first round.

Loaner pads for a group event should be cleaned and checked between players. Sort them by size on labeled tables so players can try them on quickly. Keep at least one spare in each size so a poor fit does not delay a heat.

When to remeasure or replace Gallaz pads

Gallaz pads need a fresh fit check whenever the pad starts to slide, gap or pinch. Growing skaters, changes in training and swelling after injury can all shift your size. Remeasure with the same method and compare the new numbers to the chart.

Worn parts on Gallaz pads can make a correctly sized pad fit poorly. Look for cracked caps, compressed foam, stretched elastic and straps that no longer grip. Some designs allow replacement caps or straps, so check what the maker offers for your model.

Pads that took a hard impact deserve a close inspection before the next session. Damage inside the foam is not always visible from the outside. A skater with a joint injury should get fit advice from a medical professional before skating again.

Questions about Gallaz pad sizing

How do I know what size Gallaz knee pads to get?

Your Gallaz knee pad size comes from leg measurements matched to the current Gallaz size chart. Measure around the points the chart names with the knee slightly bent. Pick the size label whose range on the chart contains all of your readings.

Should I size up or down if I'm between sizes in Gallaz pads?

Neither direction is right for everyone when your Gallaz pad measurements fall between sizes. A snugger size suits skaters who want the pad held firmly during falls. A larger size can work when the straps leave enough room to tighten.

Do Gallaz pads fit the same as other brands?

No, a size label from another brand does not translate directly to a Gallaz size. Each maker shapes and cuts its pads differently, even when the labels match. Measure yourself again and use the Gallaz size chart for the exact model.

Can I wear Gallaz knee pads over leggings?

Yes, Gallaz knee pads can go over thin leggings if you measured with them on. Thick fabric adds bulk and may push you toward a different size. Slippery fabric can also let the pad shift, so test the fit while moving.

How tight should Gallaz pads be?

Gallaz pads should feel snug enough to stay centered without causing numbness or pinching. A pad that slides during a squat is too loose for skating. Loosen the straps at any sign of tingling, cold skin or deep strap marks.

Read next

Latest articles